Stainless Steel Babak Bar
Katerangan
Prosedur produksi:
Unsur atah (C, Fe, Ni, Bungbulang, Cr jeung Cu), smelted kana ingots ku AOD finery, panas digulung kana beungeut hideung, pickling kana cairan asam, digosok ku mesin otomatis tur motong kana lembar.
Standar:
ASTM A276, A484, A564, A581, A582, EN 10272, JIS4303, JIS G 431, JIS G 4311 sareng JIS G 4318
ukuran:
Hot-digulung: Ø5.5 mun 110mm
Tiis-digambar: Ø2 mun 50mm
ngajalin: Ø110 ka 500mm
Panjang normal: 1000 nepi ka 6000mm
Kasabaran: h9&h11
Fitur:
penampilan nice tina gloss produk tiis-digulung
Nice kakuatan suhu luhur
Pengerasan kerja anu saé (sanggeus ngolah magnét lemah)
Solusi kaayaan non-magnét
Cocog jeung arsitéktur, konstruksi jeung aplikasi sejenna
Aplikasi:
Widang konstruksi, industri wangunan kapal
bahan hiasan jeung billboard publisitas outdoor
Beus jero jeung luar bungkusan jeung wangunan jeung cinyusu
Handrails, electroplating na electrolyzing pendants sarta kadaharan
Korosi- sareng abrasion bébas pikeun nyumponan sarat khusus tina sagala rupa mesin sareng médan hardware
Inpo dasar
Aplikasi umum
316 Kelas Stainless Steel Babak bar gaduh sajumlah ageung aplikasi, aranjeunna tiasa dipotong, dibentuk & dibengkokkeun, benang, dibor sareng dilas pikeun dianggo dina:
Aplikasi Kelautan
Lingkungan Kimia
Axels & Shafts
Grills & Grates
Layar
Grills kaamanan
Téknik Umum
Persiapan beungeut jeung coatings
Beda sareng baja hampang, kimia baja tahan karat hartosna prosés sareng metode pikeun ngajagi sareng ngabéréskeun 316 Kelas Stainless Steel béda pisan sareng baja hampang.Paling permukaan rengse pikeun stainless steel bakal mechanically (Polishing) atawa kimiawi (Passivating) dilarapkeun.Lapisan permukaan anu leres bakal gaduh dampak anu ageung dina pagelaran sareng penampilan stainless steel anjeun.
Salah sahiji pertimbangan anu paling penting pikeun pagelaran sareng penampilan Stainless Steels nyaéta kabersihan.Permukaan kedah dijaga tina partikel logam sanés khususna alloy atanapi baja karbon.Kayu ogé ngagaduhan rereged anu bakal ngarusak sareng ngawarnaan stainless steel.
Sasmita tina bar stainless steel
| Kelas | Kelas | Komponén Kimia% | ||||||||||
| C | Cr | Ni | Mn | P | S | Mo | Si | Cu | N | Lain | ||
| 301 | 1.431 | ≤0.15 | 16.00-18.00 | 6.00-8.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | ≤0.10 | - |
| 304 | 1.4301 | ≤0.07 | 17.00-19.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 304L | 1.4307 | ≤0,030 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 304H | 1.4948 | 0.04-0.10 | 18.00-20.00 | 8.00-10.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 309 | 1.4828 | ≤0.20 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 309S | * | ≤0.08 | 22.00-24.00 | 12.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | - |
| 310 | 1.4842 | ≤0.25 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - |
| 310S | * | ≤0.08 | 24.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1,50 | - | - | - |
| 314 | 1.4841 | ≤0.25 | 23.00-26.00 | 19.00-22.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | 1.50-3.00 | - | - | - |
| 317 | * | ≤0.08 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - |
| 317L | 1.4438 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | ≤2.00 | ≤0,045 | ≤0,030 | 3.00-4.00 | ≤1.00 | - | 0.1 | - |
| 321 | 1.4541 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 |
| 321H | * | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Ti5(C+N)~0,70 |
| 347 | 1.455 | ≤0.08 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 |
| 347H | 1.494 | 0.04-0.10 | 17.00-19.00 | 9.00-12.00 | ≤2.00 | ≤0,045 | ≤0,030 | - | ≤1.00 | - | - | Nb≥10*C%-1.10 |
| 409 | S40900 | ≤0.03 | 10.50-11.70 | 0.5 | ≤1.00 | ≤0,040 | ≤0,020 | - | ≤1.00 | - | ≤0,030 | Ti6(C+N)~0.50 Nb:0.17 |
| 410 | 1Cr13 | 0.08-0.15 | 11.50-13.50 | 0.75 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 420 | 2Cr13 | ≥0.15 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 420J2 | 3Cr13 | 0.26-0.35 | 12.00-14.00 | - | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤1.00 | - | - | - |
| 430 | 1Cr17 | ≤0.12 | 16.00-18.00 | - | ≤1.0 | ≤0,040 | ≤0,030 | - | ≤1.0 | - | - | - |
| 416 | Y1Cr13 | ≤0.15 | 12.00-14.00 | 3) | ≤1.25 | ≤0,060 | ≥0.15 | - | ≤1.00 | - | - | - |
| 444 | S44400 | ≤0,025 | 17.50-19.50 | 1 | ≤1.00 | ≤0,040 | ≤0,030 | 1.75-2.5 | ≤1.00 | - | 0.035 | Ti+Nb:0.2+4(C+N)~0.80 |
| 446 | S44600 | ≤0.20 | 23.00-27.00 | 0.75 | ≤1.5 | ≤0,040 | ≤0,030 | 1.50-2.50 | ≤1.00 | - | ≤0.25 | - |
| 431 | 1Cr17Ni2 | ≤0.20 | 15.00-17.00 | 1.50-2.50 | ≤1.00 | ≤0,040 | ≤0,030 | - | ≤0.80 | - | - | - |
| 630 | 17-4PH | ≤0.07 | 15.00-17.50 | 3.00-5.00 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | 3.00-5.00 | - | Nb 0.15-0.45 |
| 631 | 17-7PH | ≤0.09 | 16.00-18.00 | 6.50-7.50 | ≤1.00 | ≤0,035 | ≤0,030 | - | ≤1.00 | ≤0,50 | - | Al 0,75-1,50 |
| 632 | 15-5PH | ≤0.09 | 14.00-16.00 | 3.50-5.50 | ≤1.00 | ≤0,040 | ≤0,030 | 2.00-3.00 | ≤1.00 | 2.5-4.5 | - | Al 0,75-1,50 |
| 904L | N08904 | ≤0.02 | 19.0-23.0 | 23.0-28.0 | 4.0-5.0 | ≤0,045 | ≤0,035 | ≤1.00 | 0.1 | Cu: 1.0-2.0 | ||
